Product » TRINITY 788

There were 9 articles found in this Section:

1. TRINITY 788 - How do I cancel "Passage mode"?
   Scan a valid fingerprint or input the valid code, the door will now lock.
2. TRINITY 788 - How can I keep the door unlocked?
   Scan a valid fingerprint so lock allows entry, press the * key within 5 seconds of successful opening and the lock will remain unlocked.This is called "Passage mode"
3. TRINITY 788 - Why do I hear the motor turn when a fingerprint has been applied but the door does not open?
   Most likely, the center shaft between the 2 lock parts are not aligned properly.Uninstall the lock, check the center shaft cradle on the enrollment side of the lock to be sure the top and bottom points are properly aligned.They should point at each other.Reinstall the lock and test
4. TRINITY 788 - How does the lock open when the unit has a dead battery?
   The emergency over-ride key can be used if available.You may also hold a 9 volt battery in place at the bottom of the lock making sure the smaller battery post is on the right side, then scan a valid user print.
5. TRINITY 788 - How do I delete an individual user print?
   Scan the master print then press "-". Now use the + or - buttons to adjust the first digit of the print number then press # . Use the + or - keys to adjust the second digit for the desired print number, then press # you will see the print number flashing press # to confirm the delete press * to ...
6. TRINITY 788 - Can I delete an individual fingerprint?
   Yes, an individual fingerprint can be deleted , be sure to keep a list of "fingerprint numbers for identification.
7. TRINITY 788 - Can I use a code and fingerprint combo?
   No,the lock does not utilize print/code combos
8. TRINITY 788 - Can I use a code only?
   Yes, there is only 1 code available for emergency use
9. TRINITY 788 - How many fingerprints can be enrolled?
   The Trinity lock will allow for 96 regular users prints, 3 master prints and 1 access code