To program the system to call out -

Press NEXT until you see INSTALLERS MODE, then press SHOW/OK

Now press 9999

Press NEXT until you see DEFINE PANEL on display, then press SHOW/OK

Press NEXT until you see 05 ABORT TIME, press Show/OK

(If you see 00s, just press Show/OK)

(If you see anything else, press NEXT until you see 00s, Then press Show/OK

twice)

Press the AWAY key

Press NEXT until you see DEFINE COMM, press SHOW/OK

Press NEXT until you see 03 Area Code, press SHOW/OK

(If you see any info. programmed here, press the OFF key then Ok Twice to delete it)

(If there is nothing programmed, press SHOW/OK Twice)

Press NEXT until you see 05 1st CNTR TEL # , press SHOW/OK

(If you see any info programmed here, press the OFF key then Ok Twice to delete it)

(If there is nothing programmed, press SHOW/OK Twice)

Press NEXT until you see 07 2nd CNTR TEL # , press SHOW/OK

(If you see any info programmed here, press the OFF key then Ok Twice to delete it)

(If there is nothing programmed, press SHOW/OK Twice)

Press NEXT until you see 11 REPORT-CNTR, press SHOW/OK

(If you see DISABLE REPORT, press SHOW/OK )

(If you see anything else, press NEXT until you see DISABLE REPORT then press SHOW/OK Twice)

Now press NEXT until you see 17 PRIVATE TEL #s, press Show/OK

You will see "1st private tel #", press Show/Ok

enter the phone number as dialed from this location, then press Show/OK twice

Press NEXT to see 2nd Private Tel #, press Show/OK

enter the 2nd phone number as dialed from this location, press Show/OK twice

Press NEXT to see 3rd Private Tel #, press Show/OK

enter the 3rd phone number as dialed from this location, press Show/OK twice

Press NEXT to see 4th Private Tel #, press Show/OK

enter the 4th phone number as dialed from this location, press Show/OK twice

Now press the HOME key

Press NEXT until you see 20 REPORT PRVT, press Show/OK

Press NEXT until you see "alarms" then press Show/OK twice

Press AWAY then NEXT until you see RECORD SPEECH, press SHOW/OK

You'll see HOUSE IDENTITY

Now press and hold the 2 key while recording "the Smith residence" for example , then release the 2 key.

You can check the recording by pressing the 5 key.If you wish to rerecord, hold 2 down again and repeat.

When done, press AWAY then SHOW/OK to exit programming.

When anyone receives a call from the system, they should press 9 on the phone , this will cause the system to stop calling the 4 numbers as well as make the system tell you what device tripped the alarm.