To enroll the sensors on the Simon 3 control:
Be sure all sensors have the covers on them before beginning.

Open the front cover at the main console The system will prompt for the "ID" enter 4 3 2 1 Now press the ADD button followed by the SENSOR/REMOTE button.

Please open and close the cover for the first sensor, you'll hear a beep at the console.

Now Press the SENSOR /REMOTE button until you hear the appropriate sensor name as in "front door" then press DONE The unit will ask you to enter the group number, enter "10", then DONE

The first sensor will be used on the door you enter and exit the property through.

Now press the ADD button followed by the SENSOR/REMOTE button.

Please open and close the cover for the second sensor, you'll hear a beep at the console.

Now Press the SENSOR /REMOTE button until you hear the appropriate sensor name as in "back door" then press DONE The unit will ask you to enter the group number, enter "13", then DONE

You can now close the main consoles cover.

The code to arm and disarm the console is 1234 The code to program devices is 4321 We do not recommend changing the 4321 code .

The 1234 code can be changed following the users guide.