Step 1: Enter Program Mode, Installer Code (4112) + 8 + 0 +0 If this key sequence does not work or you do not know the installer code you can power down the system (AC & DC) then power back up & within 50 seconds press & hold the [*] + [#] keys simultaneously for about 5 seconds this should get you into program mode. If not then the panel may have been locked out of keypad programming.

Step 2: Screen displays [20], Press [*] 56, screen displays [A01]

Step 3: Press 95[*] (this is the 1+* panic), screen displays [b00]

Step 4: Enter the zone type for this zone then press [*] to proceed: 06 = Silent Panic 07 = Audible Panic 08 = Auxiliary 09 = Fire

Step 5: Screen displays [C00], enter the report code for this zone in hexadecimal form. Example: If you want to send a 21 enter 02 01, then press [*] to proceed

Step 6: Screen displays [1C], press 0.

Step 7: Screen displays [A96] (3+# panic) repeat steps 3-9

Step 8: Screen displays [A99] (*+# panic) repeat steps 3-9

Step 9: Screen displays [A01], enter 00

Step 10: Screen displays [56], press [*] 99 to exit program mode

NOTE: There is a 90 second wait before you can trigger the panics after exiting program mode or after disconnecting from a download. To speed this up enter your code + 1 then [#] [0].