To set up the Powermax+ to send a test signal to the monitoring company, once per week, follow the steps below.

Enter the Installers mode by pressing NEXT until Installers mode is displayed, then press OK Now enter the installers code of 9999 (enter yours if this was changed) Press NEXT until you see Define Comm, then press OK Now you'll see 01 Autotest Time, press OK Enter the time of day that you wish to have the test signal sent, I usually recommend after midnight, then press OK twice Now press NEXT until you see AutoTest cycle, press OK Now press NEXT until you see "test every 7d", press OK twice Press the AWAY key then the OK button to exit programming.

The system should send the test signal once per week.